-
Ferrous Sulfate Monohydrate (over 45-60 mesh)
Chemical formula: FeSO4 · H2O
Customs HS No.: 28332910
CAS No.: 17375-41-6
EINECS No.: 231-753-5
Executive standard: Hg / t2935-2006
Appearance: gray white powder
Size: Powder
-
Ferrous Sulfate Monohydrate (20-45 mesh)
Chemical formula: FeSO4 · H2O
Customs HS No.: 28332910
CAS No.: 17375-41-6
EINECS No.: 231-753-5
Executive standard: Hg / t2935-2006
Appearance: gray white particles
Size: particles (20-45 mesh)
-
Ferrous Sulfate Monohydrate (5-20 mesh)
It is easy to oxidize into brown yellow basic ferric sulfate which is difficult to dissolve in water in humid air. 10% aqueous solution is acidic to litmus (pH value is about 3.7). When heated to 70 ~ 73 ℃, 3 molecules of water will be lost; when heated to 80 ~ 123 ℃, 6 molecules of water will be lost; when heated to above 156 ℃, it will be transformed into basic ferric sulfate.
-
Drying Ferrous Sulfate Particles
Drying ferrous sulfate mostly refers to ferrous sulfate heptahydrate, which is processed by the drying process to remove the crystal water on the product surface and reduce its moisture content. It is generally light blue or light green monoclinic junction crystal, which is easy to be slowly oxidized to yellowish brown in the air.
-
Yellow Solid Polymerized Ferric Sulfate Powder
Introduction: SPFS is a light yellow amorphous powdery solid, which is very soluble in water. 10% (by weight) of aqueous solution is a reddish brown transparent solution with hygroscopicity. Polyferric sulfate is widely used in the purification of drinking water, industrial water, various industrial wastewater, urban sewage, sludge dewatering and so on.
-
Water Treatment Agent Liquid Polyferric Sulfate
Introduction: Liquid polymeric ferric sulfate is a chemical substance, reddish brown liquid, no precipitation. It is widely used in the purification of drinking water, industrial water, various industrial wastewater, urban sewage, sludge dewatering and so on.
-
High Efficiency Polymeric Ferric Sulfate
The iron salt coagulant that is very easy to use in water treatment is polymerized ferric sulfate. It not only has ideal coagulation and turbidity removal effect, but also has very good decolorization and phosphorus removal effect. It is widely used in power plant sewage treatment, electroplating wastewater, printing and dyeing wastewater, coking wastewater and so on. How to correctly use polymerized ferric sulfate?
-
Flocculant Polymeric Ferric Sulfate
Polyferric sulfate is widely used in the purification of drinking water, industrial circulating water and industrial wastewater from chemical, petroleum, mining, papermaking, printing and dyeing, brewing, steel, gas and other industries.
In practical production and application, Lebang polymerized ferric sulfate can reduce the treatment cost compared with other flocculants.
-
Composite Polymeric Ferric Sulfate
Composite polymeric ferric sulfate has strong corrosivity when it is coated with iron salt flocculants. There is a common problem of chromaticity in treated water. Compared with polymerized ferric chloride, its corrosivity is greatly weakened, and the chromaticity and total phosphorus of reducing the content of iron ions in water are very effective. The dosage is small and the cost of water treatment is low. The treatment effect is stable and not affected by temperature change.
-
Feed Grade Calcium Formate
As a new feed additive. Feeding calcium formate to gain weight and using calcium formate as feed additive for piglets can promote piglets’ appetite and reduce the rate of diarrhea. Adding 1% ~ 1.5% calcium formate to the piglet diet can significantly improve the performance of weaned piglets. German research found that adding 1.3% calcium formate to the diet of weaned piglets can improve the feed conversion rate by 7% ~ 8%, and adding 0.9% can reduce the incidence of diarrhea in piglets.
